Basic Parameter |
Applicable Material |
PC |
Max. Product Volume |
25L |
Dry Cycle |
650 pcs/h |
Machine Size (L×W×H) |
5.0×2.4×3.8(M) |
Machine Weight |
11.6T |
Total Power |
70KW |
Power Consumption |
45KW/H |
Plasticizing System |
Specification |
good plasticizing capability, high output, transducer adjust speed, collect temperature-control signals to prevent the screw from cold starting |
Hydraulic motor |
High torque, low noise hydraulic motor |
Machine Barrel Screw |
∮82mm，L/D=33, 38CrMoALA high quality nitrogen steel |
Plasticizing |
150Kg/H |
Heating Zone |
8Zone Casting, aluminum heater |
Heating Power |
16K W |
Cooling fan |
8zones 185W |
Extrusion System |
Specification |
Accumulator die head twist type runner, first in first out |
Max. Dia. of Die Head |
150mm |
Heating Zone |
4 zone heat coil of stainless steel |
Heating Power |
8 KW |
Die Heat Huff |
Pressure and capacity can be adjusted |
Preform Adjustment |
Automatic |
Heat insulation |
By heat insulating board between accumulator and hydraulic cylinder |
Open and Clamping System |
Specification |
Linear rolling guide |
Clamping Force |
220KN |
Mold Move Stroke |
400～900mm |
Max. Mold Platen |
W×H:760×660mm, |
Electric Control System |
Specification |
Standard PLC and colorful touch screen for blow molding machine |
Touch Screen |
Colorful touch screen, auto alarm, diagnose the system |
Temperature Control |
Self-regulation |
Temperature Module |
Japan Omron temperature controller, digital communication |
Action control |
Japan Mitsubishi, programmable |
Protection Function |
Automatic alert and breakdown feedback double protection of mechanical apparatus |
Hydraulic System |
Specification |
Proportion pressure controller changing direction quickly and softly |
Oil pump motor |
three phase a synchronism (380V、50HZ),45KW |
Hydraulic pump |
Vane pump |
Hydraulic valve |
imported hydraulic components |
System pressure |
120kg/CM2 |
Pipes |
Bilayer high pressure blast pipes |
Cooling Mode |
Water cool and oil cooler separately |
Pneumatic System |
Specification |
imported famous brand pneumatic pressure |
Air Pressure |
0.8Mpa |
Air Consumption |
0.8M3/min |
Valve |
TAIWAN AIRTAC |
Cooling System |
Specification |
mold、barrel、oil box adopt independent cooling waterway |
Cooling Medium |
water |
Water Consumption |
60L/min |
Water Pressure |
0.2-0.6MPa |
Thickness control system |
Main function |
Setting the thickness curve of the perform , control thickness automatically |
Parison programmer |
Japan MOOG 100 points |
Servo valve |
Japan MOOG |
Sensor |
Italy Gefran |